· As a decorative element added to the Morgui extractor hoods, the plenum seal can be designed with a 21mm height socket.
· This channel, made entirely of stainless steel, will have a depth of 23mm.
· Can be ordered with 3K or 4K linear LED light built-in IP65 or, on the contrary, without lighting.
· In addition, this channel can travel the entire perimeter of the hood or only the front.
· The height of the plenum, and consequently, the height of the whole hood, can be modified if this decorative extra is added.
· The added cost for this extra decorative element will be accounted in euros on M/L. In addition, if linear LED light is incorporated, the cost of one transformer unit must be added
  for every 5m linear led light. The transformer is an indispensable component for the connection of the LEDs.
· When the total linear meters of led light are greater than 5m, it will be necessary to incorporate more than one transformer unit. The trafo is for each 5m linear led light.
· If the linear led luminaire (3K or 4K) is included in the socket, this led strip will be placed frontally and encased in an anodized metallic profile with a white opal diffuser
  to spread the light evenly. This diffuser, which will act as final trim, will be slightly inserted a few millimeters into the channel.
· Beret, Cadí, Vilak, Hidro and Horno hoods models will be able to have this extra if the client requests it at the time of placing the order.

Technical Data Sheet