After the pandemic and the cancellation of the 2020 edition, Hostelco returns with a lot of strength and with the hope of being a platform to boost and revive the business. As it could not be otherwise, Morgui Clima will participate in this great event for the sector.
The trade fair will take place at the Fira Barcelona - Gran Via exhibition centre, in Hospitalet de Llobregat, from April 4 to 7. You will find us in Hall 4, stand D851, from 10 am to 7 pm and on the 7th until 6 pm.
Below, we will briefly tell you about the novelties we will present and the products we will have on exhibition. However, to know all the details first hand, the best thing to do is to visit us and chat in person, right? Come and see our products and services first hand, as well as our team of professionals, and you'll get a gift!
HOSPITALITY
If there is something that defines us, it is our capacity for innovation and commitment to our own design. For this reason, once again, we present new designs and new models of extractor hoods. For this edition of Hostelco 2022, we have designed two new hoods:
- Beret Inductor Hood. "Combining the best of two series, Beret and Indok, to seek an optimal result."
It has extraction plenum and luminaires in horizontal position. Its design and construction responds to the UNE 16282 standard. In addition, it is presented with a different visual aspect: lacquered stainless steel.
- Tossa semi-domestic/domestic hood. "The balance between functionality and aesthetics, with double suction capacity."
Unlike the domestic hoods we currently find on the market, the filters are inclined, and it incorporates a grease decanting system. The Tossa hood is designed with open sides and double collector, one at the rear and one at the front. This ensures a sense of space for cooking and compensates for its suction capacity.
Sounds good, doesn't it? We encourage you to see them in person at Hostelco.
At the booth, we will also have samples of LED luminaires, filters and different stainless steel colour finishes for extractor hoods.
COMPLIANCE WITH UNE REGULATIONS
In Morgui Clima we are always committed to innovation and investment in R+D+i. Our commitment is to be at the forefront with the compliance of all the norms and regulations. Our cutting-edge designs are governed, among other things, by strict compliance with the updates that the different standards may undergo. For this reason, in Morgui Clima we innovate year after year in the design of industrial extractor hoods.
New UNE 16282: "Equipment for commercial kitchens: Components for ventilation of commercial kitchens". Its different sections specify new requirements that set new rules for manufacturers of machinery for commercial kitchens. As far as cooker hoods are concerned, here is a list of the 10 most important technical requirements:
16282: Extractor hoods - Design and requirements.
- Kitchens with equipment with a rated power of more than 25 kW must incorporate mechanically forced air supply.
- The supply air shall be filtered according to IDA2 (F7).
- The air supply shall be 90% of the extraction.
- The extraction hoods must be installed at least 2 m from the floor.
- Special hoods for barbecues, embers, or grills shall be installed 1.2 m above the floor.
- Luminaires should always be recessed in the ceiling of the hood and should have a minimum IP54 tightness rating.
- All non-horizontal surfaces must be completely vertical.
- Extractor hoods with air supply must be internally insulated to avoid condensation due to temperature contrast.
- Plenums are prohibited in extractor hoods that are not accessible for complete cleaning.
- All extractor hoods should have an identification label specifying the manufacturer, model and the standard they comply with.
INDUSTRIAL VENTILATION
The Kitchen Net Air (KNA) filtration unit and the RUCK fans are examples of the latest innovations we have added to our product portfolio.
On the one hand, the Kitchen Net Air (KNA) filtration unit offers an average filtration efficiency of around 90%, thanks to the combination of a G4 filter and an F7 filter. This equipment incorporates different filtration stages and is installed in the air supply, upstream of the ventilation box.
On the other hand, the RUCK MPS series centrifugal fans, with single inlet, jet blades and motor incorporated directly on the shaft, withstand 200 °C in continuous operation and are fire-resistant to 400º/2 h. They are ideal for fume extraction in professional kitchens, where large quantities of soot and grease particles are generated. Their motor can be regulated by means of a frequency drive, achieving optimum performance at all times.
Both are built in galvanized steel, are install-friendly and have an easy access system to the filters and the turbine respectively. Maintenance and cleaning are essential to extend the useful life of the filters and fans.
We will also have on display the UNIC 400 ventilation box in a transparent format to see its inside and frequency drives. Both products are of vital importance in efficient fume extraction installations.
INSTRUMENTATION
Since our foundation, 25 years ago, we have been distributing instrumentation equipment for the control and treatment of air, and the automation of installations. We have an excellent technical and customer service that advises and responds to your specific needs.
At Hostelco you will have the opportunity to meet the staff of Morgui Clima, as well as some of the products we offer and that have their applications in hotels, restaurants and kitchens. Specifically, from the brand Produal, we will have demos of tetra combined sensors (CO₂, VOC, temperature, and humidity), compact controls with touch screen TRx and also its Wireless Proxima MESH system. In addition, you will also be able to see ECRO's AFX9 controller for clean rooms, the most competitive in the market.
Too many spoilers so far. See you from April 4 to 7 in Hall 4, stand D851.
