· Morgui industrial extractor hood specially designed for barbecues, coals of volcanic lava or coal, roast chicken ovens, or any application where a high temperature occurs that can affect the extractor, or in any kitchen with high fat production or waste.
· Rear height of 690mm, 660mm front height.
· AISI 430 stainless steel plate filters 490x490x50mm in the first filtration stage and 490x400x25mm in the third stage. Both included in the price.
· This hood is manufactured with three stages of filtration:
  1st stage: designed to filter the fats through the refrigerated filters, achieving greater condensation effectiveness and lowering the temperature of the air that reaches the extractor.
  2nd stage: designed to decant moisture or drops that can be aspirated by the fan. Spray nozzles extend a uniform water curtain.
                     Water consumption is 0.3l/min per mouth, at 2 bar pressure and without the need for a pressure pump.
  3rd stage: designed to separate water droplets using 490x400x25mm filters.

TECHNICAL INFORMATION

· Applications: Barbecues, volcanic coal and coal embers and roasts or roast chicken ovens.
· Format: Mural or central.
· Construction: Fully welded bell in one piece up to 7m reducing possible linear deformations, eliminating dripping between joints and non-visible points of dirt.
                         Optional multi-piece construction.
                         Three stages of filtration.
· Material:  1 mm thick AISI 304 stainless steel sheet. Roof not seen in galvanized.
· Details:    Contribution plenum with anti-condensation insulation included.
                  Tubular structure for a better robustness of the set.
                  Double folding in all sheet metal ends prevents all kinds of accidental cuts.
                  No hidden screws or strange edges for easier cleaning.
                  OPTIONAL LUMINARY.
· Grease collector: Perimeter connected to the lower tray without the possibility of dripping.

DOWNLOADS

Technical Data Sheet
Wall Extractor Hoods Installation Manual
Central Extractor Hoods Installation Manual
Maintenance Manual

Morgui Clima SL manufactures its own MORGUI branded hoods specially designed for hostelry sector. 
The high quality of it hoods fully welded made them ideal for installations where the quality performance and the finishes are the professional target.
The range of available hoods is very wide with different heights in order to adapt to any installation.